Toilet Paper Holder Circle/Half Circle Instruction
This circle and half-circle toilet paper holder comes in two parts for easy assembly and a sleek, modern design. Follow these steps for proper installation.
Step 1: Position & Mark Drill Points
-
Hold the back part of the holder against the wall at the desired height.
-
Use a spirit level to ensure it is straight.
-
Mark the drill hole positions with a pencil through the back mounting slots.
Step 2: Drill Holes & Insert Wall Plugs
-
Drill holes at the marked positions.
-
Choose plugs according to your wall type:
-
Concrete or brick walls → heavy-duty wall plugs.
-
Drywall/gypsum board → drywall anchors.
-
Wooden walls → screws can go directly without plugs.
-
-
Insert the wall plugs flush with the wall.
Step 3: Secure the Back Part
-
Position the back piece over the wall plugs.
-
Insert screws through the back piece into the plugs.
-
Tighten with a screwdriver until firmly fixed.
Step 4: Insert the Metal Rods
-
Slide the metal rods into the designated slots of the back piece.
-
Push them fully in, ensuring they are straight and stable.
Step 5: Attach the Circle/Half-Circle Front Piece
-
Align the front circle or half-circle panel with the metal rods.
-
Push the front piece onto the rods until snug.
-
Secure in place with the provided screws if required.
Final Checks
-
Place a toilet paper roll to test fit and stability.
-
Ensure the front part is firmly locked on the rods.
-
Re-tighten screws if needed.
More inspiration
Balance toys Headphone stand Phone stand Table organizer
Bathroom hooks Kids furniture Pickle triangle Toilet paper holder
Bathroom mirrors Kids shelf Shelves Towel holder
Bathroom step stools Kitchen organizer Sofa arm tray Wine stand
Decorative wall Knife holders Spice rack Wooden shelf
Floating night stand Metal shelf Standing night stand
Dejar un comentario